Primrose Alloys has many years of experience in aluminum trading and uses this experience to offer its customers the highest quality products at the most competitive prices. Primrose Alloys works with reputable mills in China, Latin America and Europe to source a wide array of aluminum products, from heat treatable sheet and plate to hard alloy rod and bar. This allows Primrose Alloys to meet most of its customers’ aluminum sourcing needs. Furthermore, by working with independent mills, Primrose Alloys is able to offer an alternative to working with large mills in Russia, the US and Canada that control pricing of aluminum worldwide.
Please download our Line Card: Primrose-Aluminum.pdf
Extruded
6061 T6511 thru 14” (355.6 mm) Round
2024 T3511 thru 11” (275 mm) Round
7075 T6511 thru 11” (275 mm) Round
6042 T5511 thru 4” (101.6 mm) Round
6262 T6511 thru 4” (101.6 mm) Round
Cold Drawn
2024 T351 thru 4” (101.6 mm) Round
7075 T651 thru 4” (101.6 mm) Round
6061 T651 thru 4” (101.6 mm) Round
Plate
6061 T651 to 6” (152.4 mm) thickness
2024 T351 to 4” (101.6 mm) thickness
7075 T651 to 4” (101.6 mm) thickness
Sheet / Coil
3003 sheet or coil, up to 72” (1800 cm) wide and 0.157” (4 mm) thick – tension leveled
5052 sheet or coil up to 48” (1220 cm) wide and 0.157” (4 mm) thick – tension leveled
3105 sheet or coil up to 72” (1800 cm) wide and 0.157” (4 mm) thick – tension leveled
1050 sheet or coil, up to 72” (1800 cm) wide and 0.157” (4 mm) thick – tension leveled
1100 sheet or coil, up to 72” (1800 cm) wide and 0.157” (4 mm) thick – tension leveled
We also source Household Foil in 8006, from 10 to 14 microns in thickness.
Aluminum circles in 3003/3105/5052/1100 and 1050 available upon request.
| Primrose Products — Aluminum Tubing, Bar & Rod | |||
| AMS | 4065 | Seamless Drawn Tubing (1.2Mn 0.12Cu, Annealed) | |
| AMS | 4067 | Seamless Drawn Round Tubing (1.2Mn 0.12Cu, Strain Hardened) | |
| AMS | 4070 | Seamless Drawn Round Tubing (2.5Mg 0.25Cr) | |
| AMS | 4071 | Seamless Hydraulic Drawn Round Tubing (2.5Mg 0.25Cr Annealed) | |
| AMS | 4080 | Seamless Drawn Tubing (1.0Mg 0.60Si 0.28Cu 0.20Cr) | |
| AMS | 4082 | Seamless Drawn Tubing (1.0Mg 0.60Si 0.28Cu 0.20Cr Solution & Precipitation Heat | |
| AMS | 4083 | Seamless Hydraulic Drawn Round Tubing (1.0Mg 0.60Si 0.28Cu 0.20Cr /Solution & P | |
| AMS | 4086 | Seamless Hydraulic Drawn Tubing (4.4Cu 1.5Mg 0.6Mn Solution Heat Treated, Cold | |
| AMS | 4087 | Seamless Drawn Tubing (4.4Cu 1.5Mg 0.6Mn) | |
| AMS | 4088 | Seamless Drawn Tubing (4.4Cu 1.5Mg 0.6Mn) | |
| AMS | 4169 E | Extruded Tubing (5.62N 2.5Mg 1.6Cu 0.23Cr Solution Heat Treated, Stress Relieved by Stretching and Precipitation Heat Treated, Straightened) | |
| ASTM | B | 210 | Aluminum Alloy Drawn Seamless Tubes |
| ASTM | B | 221 | Aluminum Alloy Extruded Bars, Rods, Wire, Shapes, and Tube |
| ASTM | B | 241 | Aluminum Alloy Seamless Pipe and Seamless Extruded Tube |
| ASTM | B | 429 | Aluminum Alloy Extruded Structural Pipe and Tube |
| MIL | T | 7081 | Seamless Drawn Round Aluminum 6061 Tubing, Aircraft Hydraulic Quality |
| A | 200 | Extruded Aluminum Alloy Bar, Rod, Shapes, Structural Shapes, Tube, Wire | |
| WWW | T | 700 | Seamless Drawn Aluminum Tubing |
Grades 2024-0, 2024-T3 (T3511), 3003-0, 3003-H14, 5052-0, 5083-H112, 5086-H32, 6061-0, 6061-T4, 6061-T6 (T6511), 6063-T4, 6063-T6, 6063-T832, 7075-T6 (T6511), 7075 -T73 (T73511)
Sizes range from 1/8” OD up to but not limited to 7” OD. Wall thicknesses (WT) range from .016” up to but not limited to .750”. Generally speaking these alloys are available in a combination of OD’s and WT’s as well as many different specifications. Some of these include the specifications listed in the table above.